CCTV Camera Installation at CVS Store #1023

Project ID: CVSCAM1023
Store: CVS

Overview

This article provides step-by-step instructions for installing CCTV cameras in CVS retail locations to ensure security coverage.

Equipment Overview

• CCTV camera(s) kit with mounts
• Power supply adapter
• Network cables (Ethernet)
• Mounting screws and anchors
• Tools: drill, screwdriver

Installation Requirements

• Secure mounting location with clear view
• Power outlet within reach
• Network access point nearby

Mounting the Camera

1. Select optimal camera position covering target areas.
2. Use drill to make holes for screws and anchors.
3. Attach camera mount securely to wall/ceiling.
4. Mount camera and tighten securely.

Connecting Power and Network

1. Connect the camera power adapter to power outlet.
2. Run network cable from camera to network switch or router.
3. Secure cables neatly to avoid tripping hazards.

Configuring Camera Settings

1. Access camera web interface via IP address.
2. Set administrator password.
3. Configure resolution and frame rate settings.
4. Set motion detection zones if supported.

Testing and Troubleshooting

• Verify live video feed on local monitor or remote app.
• Check for signal interference or video lag.
• Adjust camera angles as necessary.

---